| LINEN
CHUTES - SPECS
Products
>> Internal Chutes >>
Linen Chutes >> Options
Specs
• Options
CHUTE MATERIAL
Chutes handling hotel, hospital or general household linen should
be made of not lighter than 16 ga. aluminized steel or stainless steel.
INTAKES
Typical 18" wide x 18" high, hand operated
intake doors, self closing, self latching, side hinged with 1-1/2
hour 'UL' label; 170° swing, maximum 30-minute, 250° F temperature
rise. Entire door (front and back panels) in stainless steel finish.
Patent Pending
DISCHARGE
For built in wall discharge of hopper type, a self closing, top
hinged, 1-1/2 hour 'UL' label door is furnished with 165° F
fusible link. (Drain is optional).
VENT
Full diameter vent of same gauge as chute extending minimum of 3
feet (per NFPA) above roof with metal safety cap.
FLOOR
FRAMES
Standard floor frames are 1-1/2" x 1-1/2" x 3/16"
steel angle 12" longer than the chute diameter.
ACCESSORIES
1/2" NPT sprinkler and 3/4" NPT flushing heads above top
intake. Additional 1/2" sprinkler heads at alternate intakes
and at first intake as required by NFPA code.
CHUTE
CONSTRUCTION
Chutes shall be fully factory assembled with all joints welded.
There shall be a minimum of one expansion joint per floor and a
flush interior assembled without bolts, rivets or clips. The intake
door and frame shall be adjustable and securely fastened to the
intake throats that are formed as an integral part of the chute
section. Chute throat shall have a standard dimension of 10".
Larger throats built to accommodate special job conditions. Chute
shall be straight and plumb with no offset.
DIMENSIONS
LINEN
INTAKE DOOR SIZES |
HOPPER
DISCHARGE
DOOR SIZES |
CHUTE
Ø |
WIDTH |
HEIGHT |
CHUTE
Ø |
WIDTH |
HEIGHT |
24" |
18" |
18" |
24" |
24" |
30" |
28" |
21" |
21" |
28" |
28" |
36" |
30" |
21" |
21" |
30" |
30" |
36" |
36" |
24" |
24" |
36" |
36" |
48" |
NOTE:
Custom door sizes available upon request. Please consult CHUTES'
Sales Department.
|
